#!/bin/sh
# default acpi script that takes an entry for all actions.

. '/etc/conf.d/acpid'

# check OS name with HyperbolaBSD uname.
UNAME="$(uname -s)"

acpid_ac_adapter() {
  case "${1}" in
  'plug')
    LAD="${ACPID_AP}"
    ;;
  'unplug')
    LAD="${ACPID_AU}"
    ;;
  *)
    return
    ;;
  esac

  case "${UNAME}" in
  'Linux')
    LFD="/sys/class/backlight/${ACPID_AB}"
    LBF="${LFD}/brightness"
    LMF="${LFD}/max_brightness"
    unset LFD
    printf "$((${LAD}*$(su -c 'cat '${LMF})/100))" > "${LBF}"
    unset LBF LMF
    ;;
  'HyperbolaBSD'|*)
    return
    ;;
  esac

  unset LAD
}

acpid_echo_sound() {
  _play_audio() {
    case "${1}" in
    'sndio')
      LSS="${1}"
      LSF="snd/${ACPID_SC}"
      ;;
    *)
      case "${UNAME}" in
      'Linux')
        LSS='alsa'
        LSF="hw:${ACPID_SC}"
        ;;
      'HyperbolaBSD'|*)
        LSS='oss'
        LSF="/dev/dsp${ACPID_SC}"
        ;;
      esac
      ;;
    esac

    LFD='/usr/share/sounds/freedesktop/stereo'
    LFF="${LFD}/audio-volume-change.oga"
    unset LFD

    if [ -x '/usr/bin/ffmpeg' ] && [ -f "${LFF}" ]; then
      LXC='-loglevel -8'
      ffmpeg "${LXC}" -i "${LFF}" -f "${LSS}" "${LSF}"
      unset LXC
    fi

    unset LDF LFF LSF LSS
  }

  _cksrv_and_play_audio() {
    case "${1}" in
    'openrc')
      LSC='rc-service sndiod status'
      ;;
    'runit')
      LSC='sv status sndiod'
      ;;
    esac

    case "$(${LSC})" in
    ' * status: started'|'run: sndio')
      _play_audio 'sndio'
      ;;
    *)
      _play_audio
      ;;
    esac

    unset LSC
  }

  if [ -x '/sbin/rc-service' ]; then
    _cksrv_and_play_audio 'openrc'
  elif [ -x '/usr/bin/sv' ]; then
    _cksrv_and_play_audio 'runit'
  fi
}

acpid_video_brightness() {
  case "${1}" in
  'up')
    LCB='+'
    ;;
  'down')
    LCB='-'
    ;;
  *)
    return
    ;;
  esac

  case "${UNAME}" in
  'Linux')
    LFD="/sys/class/backlight/${ACPID_AB}"
    LBF="${LFD}/brightness"
    LMF="${LFD}/max_brightness"
    unset LFD
    printf "$((${ACPID_BP}*$(su -c 'cat '${LMF})/100 ${LCB} $(cat ${LBF})))" \
      > "${LBF}"
    unset LBF LMF
    ;;
  'HyperbolaBSD'|*)
    return
    ;;
  esac

  unset LCB
}

case "${1}" in
'ac_adapter')
  case "${2}" in
  'AC'|'ACAD'|'ACPI'????':'??|'ADP'?)
    case "${4}" in
    '00000000')
      # ac pluged
      acpid_ac_adapter 'plug'
      ;;
    '00000001')
      # ac unpluged
      acpid_ac_adapter 'unplug'
      ;;
    esac
    ;;
  esac
  ;;
'battery')
  case "${2}" in
  'BAT'?|'PNP'?'C'??)
    case "${4}" in
    '00000000')
      # battery online
      ;;
    '00000001')
      # battery offline
      ;;
    esac
    ;;
  esac
  ;;
'button/lid')
  case "${3}" in
  'close')
    case "${UNAME}" in
    'Linux')
      printf "${ACPID_ST}" > '/sys/power/state'
      ;;
    esac
    ;;
  'open')
    ;;
  esac
  ;;
'button/mute')
  case "${2}" in
  'MUTE')
    case "${UNAME}" in
    'Linux')
      if [ -x '/usr/bin/amixer' ]; then
        amixer -c "${ACPID_SC}" set 'Master' toggle
      fi
      acpid_echo_sound
      ;;
    #'HyperbolaBSD'|*)
    #  if [ -x '/usr/bin/sndioctl' ]; then
    #    sndioctl -nq snd/${ACPID_SC}.mute='off'
    #  elif [ -x '/usr/sbin/mixerctl' ]; then
    #    mixerctl -qf "/dev/audioctl${ACPID_SC}" output.dac.mute='off'
    #  fi
    #  acpid_echo_sound
    #  ;;
    esac
    ;;
  esac
  ;;
'button/power')
  case "${2}" in
  'PBTN'|'PWRF')
    if [ -x '/sbin/openrc-shutdown' ]; then
      openrc-shutdown -p
    else
      poweroff -p
    fi
    ;;
  esac
  ;;
'button/sleep')
  case "${2}" in
  'SBTN'|'SLPB')
    case "${UNAME}" in
    'Linux')
      printf "${ACPID_ST}" > '/sys/power/state'
      ;;
    esac
    ;;
  esac
  ;;
'button/volumedown')
  case "${2}" in
  'VOLDN')
    case "${UNAME}" in
    'Linux')
      if [ -x '/usr/bin/amixer' ]; then
        amixer -c "${ACPID_SC}" set 'Master' "${ACPID_SP}%-"
      fi
        acpid_echo_sound
      ;;
    #'HyperbolaBSD'|*)
    #  if [ -x '/usr/bin/sndioctl' ]; then
    #    sndioctl -nq snd/${ACPID_SC}.level-="${ACPID_SP}"
    #  elif [ -x '/usr/sbin/mixerctl' ]; then
    #    mixerctl -qf "/dev/audioctl${ACPID_SC}" \
    #      output.dac.level-="${ACPID_SP}"
    #  fi
    #  acpid_echo_sound
    #  ;;
    esac
    ;;
  esac
  ;;
'button/volumeup')
  case "${2}" in
  'VOLUP')
    case "$(uname -s)" in
    'Linux')
      if [ -x '/usr/bin/amixer' ]; then
        amixer -c "${ACPID_SC}" set 'Master' "${ACPID_SP}%+"
      fi
      acpid_echo_sound
      ;;
    #'HyperbolaBSD'|*)
    #  if [ -x '/usr/bin/sndioctl' ]; then
    #    sndioctl -nq snd/${ACPID_SC}.level+="${ACPID_SP}"
    #  elif [ -x '/usr/sbin/mixerctl' ]; then
    #    mixerctl -qf "/dev/audioctl${ACPID_SC}" \
    #      output.dac.level+="${ACPID_SP}"
    #  fi
    #  acpid_echo_sound
    #  ;;
    esac
    ;;
  esac
  ;;
'jack/headphone')
  case "${2}" in
  'HEADPHONE')
    case "${3}" in
    'plug')
      ;;
    'unplug')
      ;;
    esac
    ;;
  esac
  ;;
'video/brightnessdown')
  case "${2}" in
  'BRTDN')
    acpid_video_brightness 'down'
    ;;
  esac
  ;;
'video/brightnessup')
  case "${2}" in
  'BRTUP')
    acpid_video_brightness 'up'
    ;;
  esac
  ;;
'video/switchmode')
  case "${2}" in
  'VMOD')
    ;;
  esac
  ;;
'cd/next')
  case "${2}" in
  'CDNEXT')
    ;;
  esac
  ;;
'cd/play')
  case "${2}" in
  'CDPLAY')
    # It is disabled, because it is not supported with multimedia keys and
    # it was not tested.
    #if [ -x '/usr/bin/mpv' ]; then
    #  mpv 'cdda://:1' -cache '1024'
    #elif [ -x '/usr/bin/mplayer' ]; then
    #  mplayer 'cdda://:1' -cache '1024'
    #fi
    ;;
  esac
  ;;
'cd/prev')
  case "${2}" in
  'CDPREV')
    ;;
  esac
  ;;
'cd/stop')
  case "${2}" in
  'CDSTOP')
    ;;
  esac
  ;;
esac

# Modified from: https://gist.github.com/bandaangosta/0a0fdbd03215b925576c4b234fc4d4f1
# Credits to user BlackVeils and bandaangosta

# Notify when below this percentage
low_warning=21

# Notify when above this percentage
high_warning=79

# Hibernate when critically low
crit_level=6

# How often to check battery status, in minutes
check_interval=5

while true; do
  battery_level=$(acpi -b \
    | cut -d, -f2 | cut --characters=2,3,4 \
    | sed 's/%//g')
  charging=$(acpi -b | grep -c "Charging")

  # When battery is critically low, and not already charging
  if [ $battery_level -lt $crit_level ] &&
     [ $charging -eq 0 ]
  then
    wall " Bateria criticamente baja: ${battery_level}% " \
      " Bateria tiene 5%, el sistema ya se hiberna! "
    s2disk
  fi

  # When battery is low, and not already charging
  if [ $battery_level -lt $low_warning ] &&
     [ $charging -eq 0 ]
  then
   wall " Bateria baja: ${battery_level}% " \
      " Bateria tiene menos que 20%, ve a recargarla! "
   sleep 1
  fi

# When battery is high, and charging
  if [ $battery_level -gt $high_warning ] &&
     [ $charging -eq 1 ]
  then
    wall " Bateria alta: ${battery_level}% " \
      " Bateria tiene mas que 80%, disconecte el cargador ahora "
    sleep 1
  fi
  
  sleep ${check_interval}
done

#!/bin/sh
# default acpi script that takes an entry for all actions.

. '/etc/conf.d/acpid'
. '/etc/conf.d/acpi_handler.d.sh'

    # Notify when below this percentage
    low_warning=21
    # Notify when above this percentage
    high_warning=79
    # Hibernate when critically low
    crit_level=6
    # How often to check battery status, in minutes
    check_interval=5

    while true; do
      battery_level=$(acpi -b \
      | cut -d, -f2 | cut --characters=2,3,4 \
      | sed 's/%//g')
    charging=$(acpi -b | grep -c "Charging")

      # When battery is critically low, and not already charging
        if [ $battery_level -lt $crit_level ] &&
         [ $charging -eq 0 ]
        then
        wall " Bateria criticamente baja: ${battery_level}% " \
             " Bateria tiene 5%, el sistema ya se hiberna! "
        s2disk
        fi
       # When battery is low, and not already charging
        if [ $battery_level -lt $low_warning ] &&
         [ $charging -eq 0 ]
        then
        wall " Bateria baja: ${battery_level}% " \
             " Bateria tiene menos que 20%, ve a recargarla! "
        fi
    # When battery is high, and charging
      if [ $battery_level -gt $high_warning ] &&
         [ $charging -eq 1 ]
      then
        wall " Bateria alta: ${battery_level}% " \
             " Bateria tiene mas que 80%, disconecte el cargador ahora "
      fi

    sleep ${check_interval}m
    done
    unset low_warning high_warning crit_level check_interval

#!/bin/bash

# Set the alert tone for battery, or leave it as empty quotes.
# choose an audio file
#alarm=""

# Notify when below this percentage
low_warning=21

# Notify when above this percentage
high_warning=79

while true; do
  battery_level=$(acpi -b \
    | cut -d, -f2 | cut --characters=2,3,4 \
    | sed 's/%//g')
  charging=$(acpi -b | grep -c "Charging")
  sleep 1m

    # When battery is low, and not already charging
    if [ $battery_level -lt $low_warning ] &&
       [ $charging -eq 0 ]
    then
      #play -q -v 0.40 "$alarm" &
      #espeak "blablabla" -s 140
      herbe "Batteria baja: ${battery_level}% " \
            " Bateria no tiene carga suficiente, ve a recargarla ahora para protegerla. "
       sleep 1m
      fi

    # When battery is high, and charging
     if [ $battery_level -gt $high_warning ] &&
        [ $charging -eq 1 ]
     then
      #play -q -v 0.40 "$alarm" &
      #espeak "blablabla" - s 140
      herbe " Batteria alta: ${battery_level}% " \
      " Bateria ya esta llena, disconecte el cargador ahora para protegerla."
       sleep 5m
      fi
done

light -S 5 &
. /home/you/yourscripts/battery_notify.sh &
redshift &
exec cwm